D2 W MDME 2400 Wireless Ethernet Modem
IF 1584 Rev. 1
IF 1584 Rev. 1
Page 76
4.
Ensure your PC network settings have a Subnet Mask of 255.255.255.0. This can be
easily checked using DOS command IPCONFIG.
5.
Extract FlashUpdate program, and start the program.
6.
If you are running Windows firewall, you may be prompted with the following message.
Select Unblock so that FlashUpdate program may operate. If any other firewall software
is operating, disable it.
7.
Copy new Firmware files to a known location on the hard drive of your PC. Do not
unzip these files.
8.
Specify location of Firmware bootloader file (epm_mrb_E24g_1.65) and Firmware
application file (epm_D2_W_MDME_2400_x.x.bin.gz) using the Browse buttons in the
FlashUpdate program.
9.
Connect PC to module RS232 serial port with straight-though serial cable.
10.
Select COM port connected to module in the
FlashUpdate
program.
