Cooper Bussmann 615M-1 User Manual Download Page 26 | Manualshive

Page: 26 / 74

background image

26

www.cooperbussmann.com/wirelessresources

Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual

Rev Version 1.0

Roaming

Indicates Roaming or Not Roaming. Roaming means that service is being provided
by an alternate carrier who has a roaming agreement with your contracted carrier.
While Roaming, additional charges may apply. For provisioning, the unit must be Not
Roaming.

Signal Strength
(dBm)

Measured in dBm, this is the Received Signal Strength Indicator (RSSI). For
provisioning, the signal strength should be greater than -95 dBm.

Enable/Disable OMA-DM Activation

This section is only displayed for units that are capable of automatic (OMA-DM) provisioning. Sprint supports
OMA-DM. You may choose to enable or disable automatic provisioning and save your setting. If enabled, and
the unit is not provisioned (activated), each time at power-on (only) the unit will attempt an auto-activation. This
capability is dependent on whether it is offered by your cellular carrier.

Auto-Activation

Select “Enable” to direct an unprovisioned unit to attempt OMA-DM activation once
per power-up. Click Save to save the setting after making a change.

Manual Initiation of OMA-DM Provisioning

This section is only displayed for units that are capable of automatic (OMA-DM) provisioning. The activation status
is displayed, and a button is provided to direct the unit to begin an OMA-DM provisioning attempt. Depending on
changes to your carrier’s network, it may be necessary to re-provision a unit that has already been activated. The
OMA-DM capability is dependent on whether it is offered by your cellular carrier.

Activation Status

Displays the device activation status (Activated or Not Activated).

OMA-DM

Click the OMA-DM button to trigger an OMA-DM provisioning attempt.

Activation Type

This section is displayed for units that are not capable of automatic (OMA-DM)
provisioning. Availability of OMA-DM is carrier dependent. For carriers that do not
support OMA-DM, the provisioning process must be triggered by entering carrier
specific information and clicking the carrier specified button (OTASP).

Command (OTASP
Only)

The dial command used for provisioning the modem. For OTASP the number is
*22899.

OTASP

Click the OTASP button to start the provisioning process for units using Verizon.

«
...
24
25
26
27
28
...
»

Summary of Contents for 615M-1











































































Reviews:

No comments

Related manuals for 615M-1

Brand: D-Link Pages: 66

Brand: D-Link Pages: 26

Brand: D-Link Pages: 16

Brand: Dataradio Pages: 9

Brand: Dataradio Pages: 31

Brand: NextNet Pages: 22

GX LTE 4G Series

Brand: Victron energy Pages: 8

Brand: Allied Data Technologies Pages: 35

RD232-H-RS232-925M

Brand: Wenshing Pages: 18

Brand: YoungWoo Pages: 50

Brand: THOMSON Pages: 48

Brand: GE Pages: 148

Brand: Toshiba Pages: 18

PCX1100 - DOCSIS Cable Modem

Brand: Toshiba Pages: 21

Brand: Toshiba Pages: 22

Brand: Toshiba Pages: 22

Brand: Toshiba Pages: 22

DOCSIS DAZ8820F

Brand: Toshiba Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands