20
• Uninstalling the camera driver
There are two tasks that need to be done to uninstall the movi driver. Firstly, remove the device from the
Operating System through the Device Manager. To do this:
1. With the TCG 201 camera connected, open the System Control Panel and go to the Device Manager.
2. Remove TCG 201 Camera (still) and TCG 201 Camera (video) devices from the “Imaging devices” list.
3. Remove TCG 201 camera from “Universal Serial Bus controllers” list.
4. Close Device Manager.
5. Unplug the camera.
6. Restart your computer.
7. After the restart you will need to delete the driver files. The location of files to be deleted is operating
system dependent:
• For Win98 SE, and Win Me, <windowsdirectory> = C:\Windows
• For Win2K, <windows> = C:\WINNT
8. On Win98/Me systems Delete all Cool*.inf files from the <windowsdirectory>\inf\ and <windows>\inf\
other directory.
On Win2k the files will be named oemn.inf and oemn.pnf, located in <windows>\inf. Value of n varies
from PC to PC. You may need to open the oemn.inf files in a text editor to see if they are related to the
TCG 201 Camera.
9. Delete the following from the <windows>\System\ on Win98 and Me, or the <windows>\system32
directory on Win2k:
• aoxdxipl.ax, AoxSTIAp.exe, aoxusd.dll, epavisrc.ax, epwavdst.ax, and hydxisp.ax
10. Delete the following from the <windows>\system32\drivers directory:
• aox402sc.sys, aox402vc.sys, and ep_camd.sys
11. Delete the entire \Cooli folder from <windows>\twain_32
12. Reboot the machine.
13. Now open the Control Panels>Add/Remove Programs.
14. Select “TCG 201 Camera ” and choose to remove this application.
15. Follow the on screen prompts to complete the removal.
16. Repeat for all driver installer entries that show in the Add/Remove Programs.
You have removed the driver files and associated registry entries. To reinstall your camera, run the driver
installation setup.exe and then plug the camera into your USB port.
Notes:
Uninstalling your
My Camera Driver
does not delete your album folders and therefore all images transferred into your default or created albums
will be preserved.
• Regulatory Information
FCC Notice
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cable must be used with this unit to ensure compliance with the Class B FCC limits.
Under the environment with electrostatic discharge, the product may malfunction and require user to reset
the product.
UK 0802
© 2001 WWL
Part No.: OM837317 R1
Printed in China
Summary of Contents for CIC-300
Page 1: ...TM User s Manual Movi M ...
