5
• Installing the batteries
2 x AA (UM-3) Alkaline batteries are supplied with the product. Follow the procedure below for installing
batteries. Make sure the batteries are placed correctly in their positive (+/-) negative position. See inside
marking on battery door cover.
Note:
Before opening the battery door and inserting the batteries, you must download all the pictures in the camera to a
computer rst, otherwise pictures will be lost once battery power has been cut off.
1. Open the camera battery door by sliding the lock to the left.
2. Insert the batteries as shown, ensuring you follow the +/- polarity correctly.
3. Close the camera battery door by sliding the lock back to the right.
• Checking the battery level
Check the battery power level before taking pictures. For guidelines on battery usage, see Using Your
Batteries.
1. Turn the camera on.
2. Check the battery status level that appears on the camera LCD screen. When batteries voltage are too
low to operate. The LCD Display
will blink continuously.
Note:
Remember to upload your pictures before changing the batteries.
• Automatic power off saves batteries
Your Camera is designed to switch off automatically and save battery life without losing the pictures taken
after 30 seconds of non use. The Power Indicator LED will go off automatically when the camera is in stand
by mode. Press the Mode/On Button to reactivate the camera. The camera will sound a high beep and the
LED/LCD indicator will come back on to indicate that the camera is ready and in operation.
• Checking Camera Status
Switch the Camera on, view the camera LCD screen to check which camera settings are active.
High Resolution
Images Remaining
Picture Quality
Camera Status
Low Battery
Low Resolution
Clear Memory Mode
Self-Timer Mode
Continuous Mode
Low Battery Warning
(LCD will blink)
2 Taking Pictures
• Taking a Picture
1. Switch the camera ON. The Red Power Indicator Light in front of the camera
lights up.
3. Frame your subject using the camera viewfinder.
4. Press the Shutter/Select Button to take an picture. Hold the camera steady.
A high pitched beep sound is emitted when the picture has been taken. The
LCD will show a number, indicating the number of pictures remaining in the
camera.
Shutter Button
Mod
e/O
n
Shu
ter
/Se
lec
t
