Convotherm OEB Page 94 User Manual Download

Page: 94 / 202

How to operate the control panel

User manual

►

Cooking as part of the daily routine

Hot steam / vapor

Risk of scalding from hot steam and vapor

Escaping hot steam and vapor can cause scalding to face, hands, feet and legs.

Open the appliance door as specified in the safety regulations. Never put your head into the oven!

Contamination hazard

Risk from microbiological contamination of food

When loading the oven ahead of time, e.g. for pre-setting the start time of the cooking program, the
cold chain of chilled foodstuffs may be broken.

When planning the loading times, always ensure there is no break in the cold chain.

Requirements

Check that the following requirements have been met:

The combi steamer is cleaned properly.

The suction panel is properly locked in place.

For table-top appliances: the rack or shelf rack is fixed in place.

You are already conversant with the operating steps listed under "How to do it correctly".

Boiling

To cook, follow the steps below:

Step

Action

Button

Preheat your combi steamer if required.

Enter the cooking program you require or retrieve it from the
cookbook.

Result:

A cooking program is available.

Load the oven.

Start the cooking program.

Result:

The cooking program starts running.
The function indicator lights up.
An audible signal is given as soon as the cooking program is
finished.

Open the appliance door and remove the cooked product.

Start the cooking program later

You can use the start-time preset to start the cooking program at a later time.

Summary of Contents for OEB











































































































































































































Search results

Summary of Contents for OEB

Reviews:

Related manuals for OEB

Brands by name

Popular brands

Convotherm OEB, User Manual

Search results

Summary of Contents for OEB

Reviews:

Related manuals for OEB

Brands by name

Popular brands