Command
Description
ZoneLineOut A AudioSrc=OAR_In A
Zone Audio output “A” plays OAR
audio from the TV connected to
HDBaseT output
“
A”
When using the mirroring function you can use any standard commands
with the mirrored HDBaseT output and the mirroring HDMI output will follow
the commands. These can be an A/V Pairing, Video or Audio commands,
etc.
•
Audio Only source selection Command Examples
This unit offers 8 direct audio only inputs, while some of these inputs
will likely be used for down mixed audio signals from surround sound
sources (for stereo only zones) we expect audio only sources to be
connected to deliver just audio to both TV zones and Audio Only
zones.
Command
Description
ZoneLineOut A AudioSrc=AnalogIn 1
Route Analog input 1 to Zone
Audio output “A”
ZoneLineOut A AudioSrc=OpticIn 1
Route Optical input 1 to Zone
Audio output “A”
ZoneLineOut A AudioSrc=CoaxIn 1
Route Coaxial input 1 to Zone
Audio output “A”
ExtLineOut 1 AudioSrc=AnalogIn 1
Route Analog input 1 to
Extended Line output “1”
ExtLineOut 1 AudioSrc=OpticIn 1
Route Optical input 1 to
Extended Line output “1”
ExtLineOut 1 AudioSrc=CoaxIn 1
Route Coaxial input 1 to
Extended Line output “1”
Above are just a few example of the audio selections available.
Please refer to the full command listing for all possible commands.
Remember if you have configured any audio zones to play the OAR
audio from the TV within a zone you must be able to select this again
to return to “listening” to that TV.
•
Individual Audio and Video Routing Command Examples
To offer the greatest level of flexibility the matrix can be used to send
individual commands for both video and audio, this allows the installer
to completely tailor the matrix to suit any possible configuration the
end user may require.
Route audio and video from HDMI input 1 to HDBaseT output A
independently:
