OpticIn n [n = 1~2]
CoaxIn n [n = 1~2]
AnalogIn n [n = 1~4]
OAR_In n [n = A~H]
CAT_In n [n = 1~2]
MixerOut n [n = 1~3]
ExtLineOut M Treble=XXX
Set the treble value for an
extended line output.
M = 1~4
XXX = -12~+12 (units: dB)
ExtLineOut M Bass=XXX
Set the bass value for an
extended line output.
M = 1~4
XXX = -12~+12 (units: dB)
ExtLineOut M Volume=XXX
Set the volume for an
extended line output.
M = 1~4
XXX = 0 ~ -100 (units: dB)
ExtLineOut M Volume=Fast XXX
Adjust the volume of an
extended line output in large
steps (2dB steps).
M = 1~4
XXX = “Up” or “Down”
ExtLineOut M Volume=Slow XXX
Adjust the volume of an
extended line output in small
steps (0.5dB steps).
M = 1~4
XXX = “Up” or “Down”
ExtLineOut M Delay=XXX
Set the audio delay for an
extended line output.
M = 1~4
XXX = 0~230 (units: ms)
ExtLineOut M Mute
Mute an extended line
output.
M = 1~4
ExtLineOut M Unmute
Unmute an extended line
output.
M = 1~4
ExtLineOut M Status
Display the status of an
extended line output.
M = 1~4
ExtLineOut M Name={NameString}
Set the verbose name of
an extended line output.
Maximum 32 characters.
M = 1~4
Note: Can only rename one
port at a time. Multi-port is not
supported.
AudioCAT_Out M AudioSrc=XXX
Set the audio source for an
AudioCAT output.
M = 1~2
