NSRTW_mk3
User’s Manual
28
d. Email-Configuration:
Optionally enable email alarms for battery and/or
level. If level alarms are enabled, adjust the threshold.
4.
Press the
Submit
button at the bottom of the web page and go back to the
Cloud-Setup
window.
5.
Press the
Activate-Instrument
button (2). At that time the instrument is completely configured,
and the window disappears. The green ring around the
Set-WiFi
button is lit, as well as the
green ring around the
Set-Email
button if emails have been configured. The instrument may try
to connect immediately, or it may try to connect after the connection interval time has elapsed.
If the instrument is not actively trying to connect right away, simply press the
Connect-Now
button.
6.
Once the instrument has successfully connected to the server, the
Manager
can simply be
closed and the instrument disconnected from USB. The instrument will keep connecting at
least at the connection intervals. It will also connect to send an alarm, or in
Auto-Recording
mode whenever a signal has been recorded.
Note that the procedure above can be applied to configure a brand new instrument, or to modify the
configuration of an instrument that is already reporting to the cloud.
