background image

3

SAFETY INSTRUCTIONS

The ConvaQuip Series of full body patient lifts reflect innovative state 
of the art design to increase user mobility. The ConvaLift will provide 
years of service if it is properly maintained as any electric and/or 
mechanical equipment requires. Please pay careful attention to the 
following important information regarding the care, maintenance, and 
operation of the patient lift.  Carefully read these instructions before 
assembling the lifter, or attempting to lift a user with the device. 

PLEASE NOTE THE FOLLOWING:

•  Special care must be taken with users/patients who cannot themselves provide 

assistance while being lifted. (i.e. patients who are comatose, spastic, agitated, or 
otherwise severely handicapped.)

•  The patient lift should be used solely for transferring a user/patient from one 

utility (beds, chairs, toilets, etc.) to another.  The patient lift should not be used for 
transporting or moving any patient from one location to another location.  

•  During lifting or lowering, whenever possible, always keep the base of the lift in the 

widest position.

•  The base of the lift should be closed before moving the lift.
•  Do not roll casters over any object while the user/patient is in the sling.
•  Do not lock casters during lifting.
•  While being lifted in a sling, always keep the user/patient centered over the base and 

facing the caregiver operating the lifter. 

•  Never leave the user/patient unattended during lifting.

The ConvaLift allows a person to be lifted and transferred safely, with minimum physical 
effort provided by the caregiver.  Before attempting to lift anyone, please practice 
operating the lift.  Also prior to actual lifting, explain the lifting procedure to the user/
patient.

Summary of Contents for ConvaLift CL600E

























Reviews: