OPERA
TING
INSTR
UCTIONS
TRANSFER FROM BED
SLING ATTACHMENT INSTRUCTIONS FOR THE
6-POINT SPREADER BAR
• User/patient should be in the center of the bed.
• Position user onto his/her side by rolling user towards you.
• Roll the sling in half, approximately. The handle on the back section should
face outward when the sling is fitted.
• Position the sling under the user/patient so the commode aperture aligns with
the base of the spine and top of the sling close to the neck.
• Roll user onto the opposite side and position him/her on the flat section of the
sling. This will allow you to unroll the remainder of the sling from the other
side of the user.
• Once the sling has been positioned centrally, feed the leg sections under the
thighs and draw them up between the thighs.
• Raise the head of the bed if this function is available.
• Move the lift slowly towards the user and position the spreader bar over the
user’s/patient’s chest.
Turn the lift “ON” by turning the red “RESET”
button clockwise. Turn the lift “OFF” by pressing
down the “RESET” button.
16
SLING ATTACHMENT INSTRUCTIONS FOR THE
6-POINT SPREADER BAR
Attach Loop A of the sling to Hook A on Spreader Bar;
attach Loop B to Hook B; attach Loop C to Hook C; attach
Loop D to Hook D.
B
B
D
C
A
A
C
D
Summary of Contents for ConvaLift CL600E
Page 22: ...NOTES 22...
