Commander SE User Guide
Issue Number 5
1
Declaration of Conformity
Control Techniques, The Gro, Newtown, Powys, UK. SY16 3BE
SE11200025
SE11200037
SE11200055
SE11200075
SE2D200075
SE2D200110
SE2D200150
SE2D200220
SE23200400
SE23400075
SE23400110
SE23400150
SE23400220
SE23400300
SE23400400
SE33200550
SE33400550
SE33200750
SE33400750
SE43401100
SE43401500
The AC variable speed drive products listed above, have been designed and
manufactured in accordance with the following European harmonised, national
and international standards:
EN60249
Base materials for printed circuits
IEC326-1
Printed boards: general information for the specification writer
IEC326-5
Printed boards: specification for single- and double-sided printed boards
with plated-through holes
IEC326-6
Printed boards: specification for multilayer printed boards
IEC664-1
Insulation co-ordination for equipment within low-voltage systems:
principles, requirements and tests
EN60529
Degrees of protection provided by enclosures (IP code)
UL94
Flammability rating of plastic materials
UL508C
Standard for power conversion equipment
*EN50081-1
Generic emission standard for the residential, commercial and light
industrial environment
EN50081-2
Generic emission standard for the industrial environment
EN50082-2
Generic immunity standard for the industrial environment
EN61800-3
Adjustable speed electrical power drive systems - Part 3: EMC product
standard including specific test methods
*Applies to Size 1 units only.
These products comply with the Low Voltage Directive 73/23/EEC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the CE Marking
Directive 93/68/EEC.
W. Drury
Executive VP Technology
Date: 8th March 2000
These electronic Drive products are intended to be used with appropriate
motors, controllers, electrical protection components and other equipment
to form complete end products or systems. Compliance with safety and EMC
regulations depends upon installing and configuring Drives correctly,
including using the specified input filters. The Drives must be installed only
by professional assemblers who are familiar with requirements for safety
and EMC. The assembler is responsible for ensuring that the end product or
system complies with all the relevant laws in the country where it is to be
used. Refer to this User Guide. A Commander SE EMC Data Sheet is also
available giving detailed EMC information.
