Commander SE User Guide
10
Issue Number 5
Table 3.12 Commander SE Size 3, 200V units
* See section 3.1.1.
** For an explanation of inrush current, see section 3.1.2.
Table 3.13 Recommended fuses and cables
Table 3.14 Braking Resistors
Before fitting a braking resistor please read the information on Braking, and
the Warnings on High Temperatures and Overload Protection at the end of
this section.
MODEL
SE33200...
550
750
AC supply voltage and frequency
3 phase 200 to 240V +/-10%, 48 to 62Hz
Input displacement factor (cos
φ
)
>0.97
Nominal motor power - kW
5.5
7.5
Nominal motor power - HP
7.5
10.0
Output voltage and frequency
3 phase, 0 to input voltage, 0 to 1000Hz
100% RMS output current - A
25.0
28.5
150% overload current for 60 secs - A
37.5
42.8
Typical full load input current - A*
22.8
24.6
Typical inrush current - A** (duration <10ms)
44
Drive power losses at 230VAC at 6kHz switching
frequency - W
230
305
Weight - kg/lb
6 / 13.2
Cooling fan fitted
Yes
MODEL
SE33200...
550
750
Recommended input supply fuse - A
30
Control cablemm²
>0.5
AWG
20
Recommended input cablemm²
4.0
AWG
10
Recommended motor cablemm²
4.0
AWG
10
Recommended braking resistor cablemm²
4.0
AWG
10
MODEL
SE33200...
550
750
Minimum braking resistor value -
Ω
11.0
Recommended braking resistor value -
Ω
15.0
Maximum braking current - A
28.0
Resistor peak power rating - kW
11.8
NOTE
