Continental Fireplaces BCDV36CFNTR, Installation And Operating Instructions Manual

Page: 46 / 128

46
W415-1516 / A / 10.22.15
EN
nut provided. Plug the harness cord into the receptacle
The wire harness provided in this kit is a universal
harness. When installed, ensure that any excess
wire is contained, preventing it from making contact
with moving or hot objects.
Because the blower is thermally activated, when
turned on, it will automatically start approximately
10 minutes after lighting the appliance and will run
for approximately 30-45 minutes after the appliance
has been turned off. Use of the fan increases the output of heat. Drywall dust will penetrate into the blower
bearings, causing irreparable damage. Care must be taken to prevent drywall dust from coming into contact with the
blower or its compartment. Any damage resulting from this condition is not covered by the warranty policy.
VARIABLE
SPEED
KNOB
51.1
RECEPTACLE /
GROUND
SCREW
JUNCTION BOX
THERMAL SWITCH