Continental Access SUPERTERM CIC1800, Installation And Service Manual, Page: 81 / 92

TROUBLESHOOTING
Superterm CIC1800 / CICP1400UL 81
Superterm Circuit Board Main Fuse
A 10-ampere (10A) slow-blow fuse protects the
Superterm main circuit board from
voltage/amperage surges. The fuse is located on
the lower right-hand edge of the circuit board
above the STKPWR terminal strip (see Figure 51).
WARNING
Verify that the main AC power to the
Superterm cabinet is switched OFF and locked
against accidental starting.
1)
Turn OFF the main circuit breaker controlling
power to the Superterm cabinet.
2)
Using a non-conducting fuse puller, remove the
old fuse (see Figure 51).
3)
Replace the fuse with a 5mm x 20mm long, 10-
Amp, 250V, slow-blow fuse.
4)
Reset the main circuit breaker.
Figure 51 - Superterm Main Fuse Location
Superterm Door Strike Fuses
Eight 2-ampere (2A) slow-blow fuses protect the
door strike relays. These fuses are located in line
across the lower center surface of the Superterm
circuit board (see Figure 52).
WARNING
Verify that the main AC power to the
Superterm cabinet is switched OFF and locked
against accidental starting.
1)
Turn OFF the main circuit breaker controlling
power to the Superterm cabinet.
2)
Locate the faulty door strike fuse (F2 - F9) (see
Figure 52). 3) Using a non-conducting fuse
puller, remove the old fuse.
3)
Replace the fuse with a 2-Amp, SB, 250V,
plug-in, slow-blow fuse.
4)
Reset the main circuit breaker.
Figure 52 - Door Strike Fuse Location