Continental Access SUPERTERM CIC1800, Installation And Service Manual, Page: 36 / 92

AUXILIARY POWER
Superterm CIC1800 / CICP1400UL 36
AUXILIARY POWER
The AUX POWER terminal strip (labeled12_V)
pr12VDC power outlets for a maximum of
three expansion UO option boards or auxiliary
devices. The AUX POWER terminal strip is
located in the lower right-hand corner of the
Superterm circuit board (see Figure 23). For
specific information regarding expansion boards,
refer to page 50, Expansion Input/Output Boards.
Table 24 lists the AUX POWER terminal strip pin
numbers and their associated functions.
Table 24 - AUX POWER (12_V)
Terminal Strip Functions
Pin Function
1 +12
2 GND
3 +12
4 GND
5 +12
6 GND
NOTE: Combined 5VDC and 12VDC accessory
current draw is limited to a total maximum value of
0.80 Amps for the basic Superterm version
(without Expansion Power Supply). Please see
Capacities , Page 10.
In the expanded Superterm Version, 12VDC
current draw is limited to a maximum of 1 Amp
(with Expansion Power Supply).
WARNING
Verify that the main power to the Superterm
circuit board is OFF before connecting any
optional devices.
WARNING
Observe Positive and Negative wire polarity
between option boards and the Superterm.
Addi12VDC Power Outlets
The third pin (Pin 3) of the DR1 through DR8
terminal strips pr12VDC to suitable access
control accessories (see Figure 24).