Conti CAG-113, Manual

Page: 47 / 64

BUILT-IN HOB
• The oven must be positioned for that easy access to wall outlet or a duble pole switch for electrical
connection.
• Do not position the Power supply cord to contact hot surfaces.
• When energy supply cable is damaged, contact with the nearest authorized service at your location
and enable its replacement with the original spare part suitable for specifications in Technical
Specifications table.
• If the device is connected directly to the device with the electrical wiring system shall be installed
between the two poles of a circuit breaker and the earthing cable must not be interrupted by a
two-pole circuit breaker.
• The adapters, multiple sockets or extension cords are not recommended for use. In accordance with
applicable safety laws must be necessary to use an adapter or extension cord. However, certainly for
the adapter and power should not exceed the specified maximum current capacity.
• The electrical safety of the appliance can only be guaranteed when it has been correctly connected to
an efficient earthed power supply, as laid down in the regulations for electrical safety. The
manufacturer can not be held responsible for any damage to persons, animals or things due to the
lack of an earth connection.
START-UP of the APPLIANCE
• Remove all packaging materials.
• Clean the product’s surfaces with a wet cloth or a sponge and then mop them.
NOTE:
Some detergents or cleaning agents may harm the surfaces. Do not use corrosive detergents,
cleaning powders/creams or sharp objects.