Conti CAG-113, Manual

Page: 31 / 64

BUILT-IN HOB
TECHNICAL SPECIFICATIONS
The hobs are designed to operate with a monophase alternating current of 220-240V ~ 50Hz. Anyway,
before the installation of the appliance, we suggest you to check always the specifications on the rating
label applied on the front bottom side of the hob.
• The manufacturer reservers it’s right to make changes in the technical specifications in order to
improve the appliance quality without any prior notice.
• The figures in guide are schematic; your product may not match exactly.
• Values stated on the markings of the appliance or in the other printed documents supplied with the
appliance are obtained under laboratory conditions as per relevant standards. These values may vary
according to the usage of the appliance and ambient conditions.
WARNING:
The use of a gas cooking appliance results in the production of heat and moisture in the
room in which is installed. Ensure that the kitchen is well ventilated: keep natural ventilation
holes open or install a mechanical ventilation device (mechanical extractor hood)
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a
window or more effective ventilation, for exrample increasing the level of mechanical ventilation where
present.
Need to do when there is gas odor
• Turn off all valves on the gas products and gas meters.
• Do not use naked flames or smoke.
• Do not operate any electrical switch. (Eg lamp switch or the door bell)
• Open the doors and windows.
• Check all pipes and connections to leak or not. Still getting the smell of gas, exit the house.
Safety about Electrical Studies
• Any work done on electrical equipment and systems, performed by competent and qualified persons.
• Turn off and disconnect it from the product in case of any damage. To do this, turn off your home
insurance.
• Make sure it is compatible fuse current with product current.
INSTALLATION
This appliance shall be installed in accordance with the regulations in force and only used in a well
ventilated location. Read the instructions before installing or using this appliance.
WARNING:
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are compatible.
WARNING:
The adjustment conditions for this appliance are stated on the label (or data plate).
Installation should be carried out according to the instructions by a professionally qualified person. The
manufacturer will not accept responsibility for any damage to persons, animals or things due to wrong
installation..
CAG-214 (Black) / CAG-216 (White) CAG-224 (Black) CAG-226 (White)
CAG-234 (Black) / CAG-236 (White)
CAG-314 (Black) CAG-316 (White)
CAG-113