Installation
8
Installing scanner software – WIDEsystem, drivers, and Scan/Copy software
Install WIDEsystem and scan/copy software on your PC
IMPORTANT
:
WIDEsystem contains your essential scanner drivers.
You must install WIDEsystem
before you connect the scanner
or install any scanner software applications.
1. Insert the WIDEsystem TOOLS USB into your PC. Normally the setup program interface will start
automatically. If it does not, locate the setup.exe file on the USB and start it manually.
2. Follow the instructions on your screen to install the software and scanner drivers. Reboot the PC when
asked to do so to complete installation.
3. Remove the USB when done with installation.
4. To verify correct installation of WIDEsystem: the WIDEsystem icon will be visible in your system tray.
IMPORTANT
:
During all installation steps, be sure to select
“YES
” if Windows asks you to allow the
software to access the network.
CAUTION
:
DO NOT YET CONNECT THE SCANNER TO POWER OR TO THE PC. This is to
ensure your own personal safety and to help protect your device from potential damage during
cleaning in the next steps
5. After installing software, leave the PC ON as you perform the next steps to prepare and setup the scanner.
2
