Maintenance
7-5
3 Start the Scanner Maintenance Utility.
Select Programs >
Scanner Maintenance to start the Maintenance Wizard. The
wizard will guide you through Camera Alignment, Stitching and
Calibration. Click the Next button in the welcoming dialog to
proceed with Camera Alignment.
4 Insert the Maintenance Sheet.
The sheet’s printed side must be
inserted face down. Align the midpoint arrow with the scanner’s
midpoint arrow and feed the chart into the scanner.
5 Load the alignment status for Camera A.
The scanner will
immediately start scanning the chart and display the alignment
status for the first camera - Camera A. The Alignment status can
be judged by the evenness of the horizontal line. The scanner will
automatically continue loading fresh views of the alignment status
until you are finished. You can click with your mouse on an area in
the view to zoom in on the alignment line if necessary. Use the
Toggle Zoom button to change between zoom levels.
Summary of Contents for Chroma 3040
Page 1: ...CHROMA 8040 6040 3040 Wide Format Color Scanner Operator s Guide...
Page 6: ...IV...
Page 9: ...Introduction 1 3 Figure 1 1 The CHROMA Large Format Color Scanner...
Page 21: ...Operator Panel and Indicators 4 3 C A D E F B Figure 4 1 Operator Panel...
