Contemporary Controls BASstat BAST-421C-BW2 User Manual Download Page 2

UM-15093500-AA1 

Page

 1 

 

 

Trademarks 

BASautomation, Contemporary Controls, and CTRLink are registered trademarks of 

Contemporary Control Systems, Inc. BACnet is a registered trademark of the American Society 

of Heating, Refrigerating and Air-Conditioning Engineers, Inc. Powered by Sedona Framework 

is a trademark of Tridium, Inc. Other product names may be trademarks or registered 

trademarks of their respective companies. 

 

Copyright 

© Copyright 2021, by Contemporary Control Systems, Inc. All rights reserved. No part of this 

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or 

translated into any language or computer language, in any form or by any means, electronic, 

mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written 

permission of: 

 

Contemporary Control Systems, Inc.

 

Tel:

 

+1-630-963-7070

 

2431 Curtiss Street

 

Fax:

 

+1-630-963-0109

 

Downers Grove, Illinois 60515 USA

 

E-mail:

 

[email protected]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disclaimer 

Contemporary Control Systems, Inc. reserves the right to make changes in the specifications 

of the product described within this manual at any time without notice and without obligation of 

Contemporary Control Systems, Inc. to notify any person of such revision or change. 

 

Summary of Contents for BASstat BAST-421C-BW2






































Reviews: