Contec PC-686CPCI-LV User Manual Download Page 87

Page: 87 / 118

CHAPTER 6 - BIOS SETUP

PC-686 (CPCI)-LV User’s Manual

AGP Aperture Size (MB)

Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a

portion of the PCI memory address range dedicated for graphics memory address

space. Host cycles that hit the aperture range are forwarded. Host cycles that hit the

aperture range are forwarded to the AGP without any translation.

The Choice: 4, 8, 16, 32, 64, 128, 256

Auto Detect DIMM/PCI CLK

This item allows you to enable/disable auto detect DIMM/PCI Clock.

The choice: Enabled, Disabled.

Spread Spectrum

This item allows you to enable/disable the spread spectrum modulate.

The choice: Enabled, Disabled.

CPU Warning Temperature

This item allows you to enable/disable the CPU warning temperature, if your computer

contains a monitoring system.

The choice: Enabled, Disabled.

Current System Temp

This field displays the Current system temperature, if your computer contains a

monitoring system.

Current CPUFAN1 Speed

This field displays the current speed of CPU fan, if your computer contains a

monitoring system.

Summary of Contents for PC-686CPCI-LV























































































































Search results

Summary of Contents for PC-686CPCI-LV

Reviews:

Related manuals for PC-686CPCI-LV

Brands by name

Popular brands

Contec PC-686CPCI-LV, User Manual

Search results

Summary of Contents for PC-686CPCI-LV

Reviews:

Related manuals for PC-686CPCI-LV

Brands by name

Popular brands