Contec PC-686CPCI-LV User Manual Download Page 61

Page: 61 / 118

CHAPTER 5 – Software Utilities

PC-686 (CPCI)-LV User’s Manual

This driver allows Chips 69000 to support Windows NT 4.0.:

;

Windows NT

3.51

Windows 98

This driver allows Chips 69000 to support Windows 98 platform: .

Windows 3.1

This driver allows CHIPS 69000 to support Windows 3.1:

Windows 2000

About Windows 2000, please use the standard VGA Drivers in the OS.

5.3. LAN Driver

5.3.1. Introduction

The CPU board PC-686(CPCI) is adopt 82559 10/100 Mbps Fast Ethernet

controller with an integrated 10/100 Mbps for PCI board LAN designs.

5.3.2. Specifications

Advanced Configuration and Power Interface (ACPI) 1.20A based power
management

Wake on Magic Packet

Wake on interesting packet

Advanced System Management Bus (SMB) based manageability

Wired for Management (WFM) 2.0 compliance

IP checksum assist

PCI 2.2 compliance

PC 98, PC 99, and Server 99 compliance.

LAN Drivers

Windows 98, Windows 95 OSR2.x , Windows95 Retail,OSR1,
Windows NT 4.0,NT3.51 : DISK1

NDIS2.01 : DISK1

NETWARE DOS ODI Client : DISK2

NETWARE 3.12, 4.1x Server : DISK2

Note:

Before install the LAN utilities please refer to the files *.txt in the

rootdirectory and subdirectory.

Summary of Contents for PC-686CPCI-LV























































































































Search results

Summary of Contents for PC-686CPCI-LV

Reviews:

Related manuals for PC-686CPCI-LV

Brands by name

Popular brands

Contec PC-686CPCI-LV, User Manual

Search results

Summary of Contents for PC-686CPCI-LV

Reviews:

Related manuals for PC-686CPCI-LV

Brands by name

Popular brands