Contec PC-686CPCI-LV, User Manual

Page: 82 / 118

CHAPTER 6 - BIOS SETUP
74 PC-686 (CPCI)-LV User’s Manual
The choice: Normal, Fast.
Typematic Rate Setting
Keystroke repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
The choice: Enabled, Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, 1000.
Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
System
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the
correct password is not entered at the prompt.
Note:
To disable security, select PASSWORD SETTING at Main Menu and then you
will be asked to enter password. Do not type anything and just press <Enter>, it will
disable security. Once the security is disabled, the system will boot and you can
enter Setup freely.
PCI/VGA Palette Snoop
Some display cards that are non-standard VGA may not show colors properly. This
field allows you to set whether MPEG ISA/VESA VGA Cards can work with
PCI/VGA or not. When this field is enabled, a PCI/VGA can work with a MPEG
ISA/VESA VGA Cards. When this field is disabled, a PCI/VGA cannot work with a
MPEG ISA/VESA VGA Cards.