4. BIOS Setup
User’s Manual
43
PnP/PCI Configurations Setup
Reset Configuration data
[Disabled]
Resources Controlled By
[Auto(ESCD)]
* IRQ Resources
Press Enter
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Item Help
Menu Level >
: Move Enter : /-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
Figure 4.8. PnP/PCI Configurations Setup Window (factory setting)
Selection from the PnP/PCI Configurations Setup
This table shows the selections that you can make on the
PnP/PCI Configurations Setup
.
Table 4.7. Selecting item of the PnP/PCI Configurations Setup
Item Option
Description
Reset Configuration Data Enabled
Disabled
The default is "Disabled"; you usually do not have to
change this setting.
After upgrading the BIOS, start it up with "Enabled"
selected, then select "Disabled" again.
Resources Controlled By Auto(ESCD)
Manual
The default is “Auto(ESCD)”.
If you have set the watchdog timer or PIO event to an IRQ,
set this item to "Enabled" and the IRQ to be used to
"Reserved" in the submenu of "IRQ Resources".
IRQ Resources
Press Enter
Pressing the Enter key opens the submenu.
