4. BIOS Setup
38
User’s Manual
Table 4.4. Selecting item of the Advanced Chipset Features Setup < 3 / 3 >
Item Option
Description
WDT Output to PO2
Disabled
Enabled
Set watchdog timer output to PO2.
Selecting "Enabled" connects the output of the
watchdog timer to the PIO2 pin in the RAS
connector. The output value changes
depending on the "WDT Power-on State" and
"WDT Time-up State" settings.
WDT Power-on State
Off
On
This item is enabled with "WDT Output to
PO2" set to " Enabled." Set the state of output
from the watchdog timer when the power is
turned on.
WDT Time-up State
On
Off
This item is enabled with "WDT Output to
PO2" set to " Enabled." Set the state of output
from the watchdog timer when the time-up.
