4. BIOS Setup
32
User’s Manual
Selection from the Standard CMOS Setup
This table shows the selections that you can make on the
Standard CMOS Setup
.
Table 4.2. Selecting item of the Standard CMOS Setup
Item Option
Description
Date
Month DD YYYY
Sets the date on the equipment calendar clock.
Note that the ‘Day’ automatically changes
when you set the date.
Time
HH : MM : SS
Sets the time on the equipment calendar
clock.
IDE Primary Master
None
Auto
Manual
Set the type of HDD(SDD *1) to be used as the
first drive. Selecting this field changes the
screen to the submenu for manually setting
drive configuration data such as the number
of cylinders. This field is set to [Auto] by
default. You can leave it intact for normal
use.
IDE Primary Slave
None
Auto
Manual
Connection not allowed. Set to "None."
IDE Secondary Master
None
Auto
Manual
Usually, set this item to "None." If you have
connected a CD-ROM drive to the secondary
IDE connector, set this to "Auto" or "Manual"
as required.
IDE Secondary Slave
None
Auto
Manual
Usually, set this item to "None." If you have
connected a CF card to the CF connector, set
this to "Auto" or "Manual" as required.
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
The default is "All, but Keyboard"; you usually
do not have to change this setting.
Video
EGA/VGA
Displays the detected amount of Video card
installed on the system.
Base Memory
N/A
Displays the detected amount of memory
installed on the system.
Extended Memory
N/A
Displays the detected amount of memory
installed on the system.
Total Memory
N/A
Displays the detected amount of memory
installed on the system.
*1 To use a PC-SDD V series product with a capacity of 500 MB or less, set the item to "Manual" and select the CHS
mode. For drive information such as the number of cylinders, see the manual for the PC-SDD series.
