4. BIOS Setup
42
User’s Manual
Power Management Setup
ACAP Function
[Enabled]
ACAP Suspend Type
[SI(POS)]
* Run VGABIOS if S3 Resume
Auto
Wake-Up by Onboard LAN
[Enabled]
Power On by Ring
[Enabled]
* USB KB Wake-Up From S3
Disabled
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level >
: Move Enter : /-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
Figure 4.7. Power Management Setup Window (factory setting)
Selection from the Power Management Setup
This table shows the selections that you can make on the
Power Management Setup
.
Table 4.6. Selecting item of the Power Management Setup
Item Option
Description
ACPI Function
Enabled
Disabled
The default is "Enabled"; you usually do not have to
change this setting.
ACPI Suspend Type
S1(POS)
S3(STR)
S1&S3
Please use it by default setting "S1(POS)".
Wake-Up by Onboard
LAN
Enabled
Disabled
Enable or disable the LAN to turn the power on with
Windows in the sleep/hibernate/shutdown state. *1
Power On by Ring
Enabled
Disabled
Enable or disable the Ring to turn the power on with
Windows in the sleep/hibernate/shutdown state.
*1 To use the Wake Up On LAN feature, this machine must receive a magic packet to awaken itself. The magic packet
contains six bytes of FF followed by 16 contiguous copies of the MAC address (irrespective of the protocol used).
