1. Introduction
FXA3000 Series
1
1.
Introduction
This chapter provides information you should know before using the product.
About the Products
The FXA3000 Series is an access point that conforms to IEEE 802.11n/a/b/g wireless networking
standards and that supports a wide range of input power (5 to 30 VDC) and PoE.
Light weight and compact design enables a smart installation with included magnets and tapping screws.
This product is supported with a connector protection cover and a security slot for theft proof.
Features
- Compatible with 4 standards, IEEE802.11n/a/b/g
You can choose 24 ch (W52/W53/W56/W58*1) in the 5 GHz (IEEE802.11n/a), and in the 2.4 GHz
(IEEE802.11n/g), you can choose from 1 to 11ch. So, it is possible to design a flexible wireless network
to adjust a radio wave interference.
- Light weight and compact design for installation setting and sophisticated appearance
Compatible with PoE and include an antenna inside chassis considering installation setting and
sophisticated appearance. This product can be used at variety of setting using included magnets and
tapping screws.
- Supports a various power supply
This product supports an AC adapter (sold separately), DC power supplies from 5 to 30 VDC, and power
supplied from the LAN connector.
- This product can be switched between access point (master station), station (slave station), and
repeater operation modes.
By switching the operation mode, you can use this product as not only an access point (a master station)
but also as a station (a slave station) and a repeater. You can use this product as a wireless LAN converter
for a wired LAN device.
- The proprietary encryption technology "WSL" that is available along with WPA2/WPA and WEP.
In addition to the certifications for advanced security standards WPA2/WPA and IEEE802.1X, this
product is also equipped with our proprietary encryption technology "WSL", which can be used at the
same time as these certifications. MAC address filtering and ESSID hiding are also supported.