4. Setup and Status Display
FXA3000 Series
33
WSL
The setting that selects whether or not to encrypt wireless data with our proprietary encryption (WSL).
Note that communication between a terminal with the WSL feature enabled and a terminal with the WSL
feature disabled is not possible. This device can only use WSL (Type 2) that utilizes the new algorithm.
The WSL key setting is only valid when the WSL feature is enabled. Note that communication between
terminals with different WSL keys is not possible.
Enter the WSL key as a 20 digit hexadecimal value (0 to 9, a to f or A to F).
Default setting : Disable, (Blank)
▼Key Setting
Default Key
This setting is only available when the encryption is set to either "WEP(Open)", "WEP(SharedKey)",
"WEP(Auto)", or "AES".
Select the key to use as "Fixed Key 1" to "Fixed Key 4".
Default setting : Fixed Key 1
Fixed Key
This setting is only available when the encryption is set to either "WEP(Open)", "WEP(SharedKey)",
"WEP(Auto)", or "AES".
Set the fixed key. Set as a hexadecimal value (0 to 9, A to F).
For "WEP", there are three lengths of fixed keys: 64 bits, 128 bits, and 152 bits. These keys require you
to enter 10 characters, 26 characters, and 32 characters.
For "AES", the length is only 128 bits, so enter 32 characters.
The fixed keys are a common setting for the VAPs. The fixed keys are displayed in the settings for each
VAP, but if the setting is changed, the change is reflected in the fixed keys for the other VAPs.
Default setting : (Blank)
▼MAC Address Authentication
MAC Address Authentication
Please set to “Enable” if you want to use the MAC address authentication using external RADIUS server.
You will also need to set the RADIUS server. Note that this device will be registered as an authenticator
on the RADIUS server and will not function if the server secret does not match.
Regardless of the value specified for "Reauthentication Interval (sec)", periodic reauthentication will not
be performed.
Default setting : Disable