Contec FX-DS540-APDL-U, User Manual

Page: 74 / 91

8. Appecdix
FX-DS540-APDL-U
67
8. Appecdix
Factory Default Settings List
Hardware Setup
- FX-DS540-APDL-U
switch1 : OFF
switch 2 : OFF
ON
1 2
Figure 8.1. DIP Switch
Initial setup
Table 8.1. Initial setup list (1/4)
Setting item Setting contents(First default)
<Base setting>
Host name (Enter a string of up to 16 single-byte
alphanumeric characters.)
(Blank)
DHCP client Disable / Enable
IP address (When disabled setting of DHCP client sets :
enable)
Seal on the back of housing
Subnet mask 255.0.0.0
Default gateway 0.0.0.0
Access point construction Compatible, Integrated
Access point type Normal, Master, Backup
IP of master AP (It is set when normal or backup) 0.0.0.0
IP of backup AP (It is set when normal or backup) 0.0.0.0
Language setting Japanese, English
Password (single-byte alphanumeric characters can be
up to 31 characters long and .the password is case
sensitive.)
(Blank)
<Ethernet>
Port speed
Recognization automatically, 100M/full, 100M/half duplex,
10M/full, 10M/half duplex
Link down sense
Disable, Enable (corresponding to 5/2.4GHz only when unit
type access point.
11g: The function when selecting IEEE802.11g.
AP: The function when unit type is access point.
ST: The function when unit type is station.