Contec FX-DS540-APDL-U, User Manual

Page: 64 / 91

5. Setup and Status Display
FX-DS540-APDL-U
57
Trap destination IP address
Trap is the function to notify a user of a change made within the SNMP agent system. The trap function
can be enabled by specify the IP address of the destination user. The SNMP manager having the IP
address specified here can manage trap information about the AP. If the network contains more than one
AP, it is advisable to register the same IP address so that all the APs can be managed on one machine. Up
to three destination IPs can be registered.
Factory default setting : 0.0.0.0
Administrator contact information
Enter contact information about the AP administrator. An example is the name and telephone number of
the network administrator. The string can be up to 32 characters long when all the characters are
single-byte alphanumeric characters or up to 16 characters long (within 32 bytes) when they are all
double-byte Japanese characters.
Factory default setting : (Not input)
Device location
Specify the physical location of the AP. An example is “Administration Division, 2F”. The string can
be up to 32 characters long when all the characters are single-byte alphanumeric characters or up to 16
characters long (within 32 bytes) when they are all double-byte Japanese characters.
Factory default setting : (Not input)
Device name
Specify the device name of the AP under SNMP. Enter a string of up to 32 single-byte alphanumeric
characters. The device name is case sensitive.
Factory default setting : (Not input)