Contec FX-DS540-APDL-U, User Manual

Page: 58 / 91

5. Setup and Status Display
FX-DS540-APDL-U
51
Details
ESSID
The name of the wireless LAN to which the AP belongs. Changing the ESSID causes the AP to be
disconnected from the network. Enter a name up to 32 alphanumeric characters. The name is case
sensitive.
Factory default setting : LocalGroup
Channel number (This item available when the unit type is “Access point”.)
Sets the channel number. Setting-able channel numbers are from “36” to “64”, “149” to “165” when
IEEE802.11a and from “1” to “11” when IEEE802.11b/IEEE802.11g.
Factory default setting : 36ch (Wireless Lan standard is IEEE802.11a)
Transmission rate
Sets the wireless transmission rate.
Select one from “Auto”, “54Mpbs”, “48Mbps”, “36Mpbs”, “24Mpbs”, “18Mpbs”, “12 Mpbs”, “9 Mpbs”,
“6 Mpbs” when IEEE802.11a.
Select one from “11Mpbs”, “5.5Mbps”, “2Mpbs”, “1Mpbs” when IEEE802.11b.
Select one from “Auto”, “54Mpbs”, “48Mbps”, “36Mpbs”, “24Mpbs”, “18Mpbs”, “12 Mpbs”, “9 Mpbs”,
“6 Mpbs”, “11Mpbs”, “5.5Mbps”, “2Mpbs”, “1Mpbs” when IEEE802.11g.
Factory default setting : Auto
Beacon transmission rate
Specify the beacon transmission rate. The options available to this item are the same as those for the
above transmission rate except “Auto”.
Factory default setting : 6Mbps (Wireless Lan standard is IEEE802.11a)
Transmission output
You can decrease the transmission output to “50%” or “25%” by software setting. To decrease the
output, select either.
Factory default setting : MAX