Contec FX-DS540-APDL-U, User Manual

Page: 55 / 91

5. Setup and Status Display
48
FX-DS540-APDL-U
Settings
Basic setting
Host name
Assigning a name to an AP makes it easier to identify on the network. Enter a name of up to 16
alphanumeric characters.
Factory default setting : (Not input)
DHCP client
Enabling “DHCP client” makes the access point available as a DHCP client.
Factory default setting : Disable
IP address
Sets the IP address of the AP. Always set the IP address. When setting via a LAN using a browser
running on a PC, the network address of the AP must be the same as the network address of the PC.
Factory default setting : (Specified on the housing seal)
Subnet mask
If using a subnet, specify the subnet mask.
Factory default setting : 255.0.0.0
Default gateway
Specify the IP address of the router for the network to which the AP belongs.
Factory default setting : 0.0.0.0
Access point construction
Sets the Access point construction.
This setting affects “Access point type”, “IP address of the masuterAP”, “IP address of the backup AP”.
Select “Compatible, when AP is coustructed by only FLEXLAN DS540 series.
Select “Integrated” when the AP includes the DS110 series as well as the DS540 series.
Factory default setting : Compatibility
Access point type
The application type of the access point can be set by selecting “normal”, “master”, or “backup”.
The “master” device integrates access points on the network and the “backup” device substitutes for the
master AP if the master AP stops working for some reason.
Factory default setting : Normal