Contec BX710 Series, User Manual

Page: 76 / 138

4. BIOS Setup
BX710 series User’s Manual
69
Description Choice
HDD Power Down
If set in “Enabled”, the hard disk drive goes into the power
saving mode when no system operation is done after the
specified time duration. Other devices continues to be
active.
Soft-Off by PWR-BTTN
In case of Soft-Off (S5) by the power button, specifies the
delay time to wait till the power button takes effect. In
“Instant-Off”, the power button takes effect immediately
after pushed down. In “Delay 4 sec”, the power button need
to be pushed and held for 4 seconds to take effect. Note
that the power button is controlled by the OS in case of
Windows.
PWRON after PWR-Fail
Only “On” is supported for PWRON After PWR-Fail.
Always boots when the power is recovered after the
power-related malfunction such as a power failure.
PCI Express WAKE
By default, this field is “Disabled”.
Selecting “Enable” enables On board Lan “WOL” function.
Note that the “Wake-Up by PCI Card” setting below should
be Enable alike.