4. BIOS Setup
90
BX710 series User’s Manual
Locations and Settings of CMOS/ROM Clear SW
If an unexpected activation failure occurs due to the BIOS setting, the CMOS/ROM clear SW can be set
in order to disable the BIOS setting and start up the system.
In the normal operation, leave the CMOS/ROM clear SW to the factory setting (both of them are “OFF”).
(1) Turn off the main power of the body, then turn on the CMOS clear switch (SW1-1) and wait for
approx. 10 seconds, then turn it off again.
(2) Next, turn on the ROM clear switch (SW1-2).
(3) Turn on the system unit to start the system. During system startup, invoke BIOS Setup to set up the
BIOS again.
(4) After completing the setting, turn the ROM clear switch (SW1-2) off again and save settings, then
reboot.
Summary of Contents for BX710 Series
