Contec AI-1204Z-PE, Reference Manual

Page: 26 / 85

—
Setup
—
AI-1204Z-PE Reference Manual
— 26 —
2. Turning on the PC
1
Turn on the power to your PC.
CAUTION

The board cannot be properly installed unless the resources (I/O addresses and interrupt level)
for the board can be allocated. Before attempting to install the board, first determine what
PC resources are free to use.

The resources used by each board do not depend on the location of the PCI bus slot or the
board itself. If you remove two or more boards that have already been installed and then
remount one of them on the computer, it is unknown that which one of the sets of resources
previously assigned to the two boards is assigned to the remounted board. In this case, you
must check the resource settings.
2
When Using the API-AIO(WDM)
When the " Found New Hardware Wizard" opens, select "Install the software automatically
[Recommended]" and then click the "Next" button.
* The wizard may not appear for some OS versions and instead the installation will start
automatically. In this case, proceed to the software initial setup step.
The setup information (INF) file is contained in the following folder on the bundled CD-ROM.
3
You have now finished installing the hardware.
\INF\WDM\AI