background image

User information 

 

 

 

5410061-00A01

 

 

2.2  Checklist for crew 

The checklist contains the minimum recommended checkpoints to be carried out on 
the VDR system. It specifies how often an item has to be checked and how to check it. 
If the check fails a solution and where to find it is included in the diagram. 
 
The checkpoints are noted in the manual using the symbol below. 

 

Caution! 

Checkpoint. 

 
 

#  When/How often 

Check 
what item 

What to do or 
check 

If not okay 

Instruc- 
tion 

1 Daily 

VDR 
Remote 
Control 
Unit. 

Check that date 
and time are 
according to 
UTC. 

Restart the system in 
Main Unit. If still not 
okay contact 
Consilium. 

Chapter 
4.6 and 
chapter 
12 

2 Daily 

VDR 
Remote 
Control 
Unit

 

Confirm that 
Normal 
Operation is 
displayed.  

Check for displayed 
alarm/warning. 
Check error list and 
follow the 
instructions.

 

Chapter 
8 and 9 

At an incident/ 
accident 

 

Perform a backup   

Chapter 
6

Yearly 

Annual 
Performance Test 
(APT) 

VDR 
system 

It is ship owners 
responsibility to 
arrange the APT. 

 

Chapter 
1

2

 

After 
maintenance, 
repair and/or 
system changes  

(on the VDR itself 
or any sensor 
involved) 

VDR 
system 

See Appendix chapter 1

3

 

Summary of Contents for S-VDR S1











































































Reviews: