Consilium S-VDR S1, User Manual

Page: 46 / 74

Investigative Authority Guide
6 54 1 0062-00A01
Example:
IP address\directory, e.g. PROCAP = 10.2.1.60\usb
2.3.1 Capsules excluding HVR/SVR (L3)
1. Connect the Ethernet cable to DATA socket in the VDR Ethernet switch.
2. Change the IP address of your computer to: “10.2.1.222 and Subnet mask:
255.255.255.0”
(see Annex 4.1 - “Change IP”).
3. Map the capsule/PBB as a network drive (see Annex 4.2 - “Map Network
Drive”).
4. Select a free drive (e.g. Z:) and directory according to the table above.
5. When “Connected to local host” write in user name and password from table
above.
6. Download data as follows:
- For a total capsule backup, copy all under drive to a prepared directory on the
connected PC (Laptop).
-
If a selected time window shall be downloaded. Study the capsule file
structure under 3.3 below and find the relevant sequence of sub directories
corresponding to required time window.
2.3.2 PBB
Connect via FTP (ftp://10.2.1.160/vdrdata). User “vdr” has a read-only access to the PBB.
2.3.3 Capsules HVR/SVR (L3)
1. Connect the Ethernet cable to DATA socket in the VDR Ethernet switch.
2. Turn the VDR power off with the Power and Battery switches inside Main
unit.
3. Change the IP address of your computer to: “10.2.1.222 and Subnet mask:
255.255.255.0”
(see Annex 4.1 - “Change IP”).
4. Install and start the separate downloading software L3HVRReader.
5. Choose Standard mode
6. Set the IP address
7. Click “Connect”
8. Mark “Latest” and required minutes backwards to be downloaded under “Data
to retrieve”, for example 120 minutes.
The capsule downloads data from last minute and backwards.
9. Under “Put retrieved data in” choose directory on connected PC (Laptop) to save
the data.
10. Start downloading by clicking down left on “Go”.
11. When Reading Finished appears, data is available in chosen directory.
Note!
Do not download data when VDR is recording to the capsule.
2.4 From a USB memory stick via Ethernet output
For special instruction contact Consilium.