![background image](http://html.mh-extra.com/html/conrad/mzk-w04nu/mzk-w04nu_operating-instructions-manual_2654690052.webp)
51
3.1. Common Settings
•
Wireless LAN: Click the check box to enable the Wireless function. The default value is “Enabled”.
After modifying the settings, please click “Apply” to save the settings and restart the system.
•
Wireless Mode: Scroll down the list to choose a band width. There are six kinds of modes: B/G/N,
G/N, B/G, B, G, and N.
•
Channel: Here shows the channels provided by the local wireless connection. The setting of the
channels of the wireless network should be the same as the wireless APs.
•
Frequency Bandwidth: Choose a kind of frequency bandwidth: 20MHz or 20/40MHz.
•
11G Protection: Enabling this setting will reduce the chance of radio signal collisions between
802.11b and 802.11g wireless access points.
•
Apply: Click this button to save and apply the settings you just made. MZK-W04NU will reboot and
apply all the changes you made.
•
Save: Click this button to save the settings you made and returns to the current page. MZK-W04NU
will not reboot, and the changes you made will not be applied just yet.
•
Clear: If there is anything wrong with the settings you made, you can click “Clear” to configure the
page again.