![background image](http://html.mh-extra.com/html/conrad/mzk-w04nu/mzk-w04nu_operating-instructions-manual_2654690015.webp)
14
3. Enter the default User Name “admin” and Password “password” and then click “OK” to enter the
system. You can also put a check in the “Remember my password” check box, and next time you
do not need to enter password to enter the system.
4. After entering the system, MZK-W04NU will show you the homepage. During configuration, you can
use the tabs on the top of the page to navigate. Besides, it is necessary that, after configuring, you
should click “Apply” to enable the settings you’ve made.
If your MZK-W04NU Wireless Router does not response, and you cannot enter the
web configuration page, please follow the steps below to check if there is any problem:
1. Make sure that MZK-W04NU Wireless Router is properly installed and powered on,
and LAN connection is O.K. You can test the connection by using “Ping” command:
• Open MS-DOS window or click “Start
➞
➞
Run…” on the desktop to show the com-
mand prompt window.
• Enter the command: ping 192.168.1.1
• If it shows the message of “Request time out,” the problem can be either disorder of
connection, or the conflict between your PC’s IP address and the router’s IP address.