52
3.2. Basic Settings
Basic Settings pages for Access Point 1~4 are slightly different. Here we use Access Point 1’s Basic
Settings page as demonstrating example.
•
SSID: Every SSID is unique in the WLAN (SSID can be 16-digitASCII characters and case-sensi-
tive). SSID can prevent two nearby WLAN from combining to be one. You can give BLW-54MF an
SSID, and only whose SSID is the same with it can connect with it. The default SSID is “con-
raduser”. Notice: When entering your SSID, please don't use special characters such as "@",
"#", "$", "%", "^", "&", "*", "(", and ")". Using special characters or symbols could cause wire-
less connection difficulties. You can click “Enable” check box to enable the Access Point.
•
Hide SSID: If you check the check box of “Hide SSID,” SSID of MZK-W04NU will not appear on the
other PC’s wireless network list. Therefore, the Wireless Router/AP can block the users without
authentication.
•
LAN Blocking: Click the check box to enable LAN Blocking function.
•
Internet Blocking: Click the check box to enable Internet Blocking function.
•
SSID Blocking: Click the check box to enable SSID Blocking function.
•
Wireless Separating: Enable this function to discard the packets between wireless adapters.
•
Authentication: Please refer to 3.3 Security below and setup your wireless LAN securities.
•
Apply: Click this button to save and apply the settings you just made. MZK-W04NU will reboot and
apply all the changes you made.
•
Save: Click this button to save the settings you made and returns to the current page. MZK-W04NU
will not reboot, and the changes you made will not be applied just yet.
•
Clear: If there is anything wrong with the settings you made, you can click “Clear” to configure the
page again.