48
2.3. IP Filtering
The built-in IP filter of MZK-W04NU applies pre-configured filter rules to packets received as well as
packets transmitted by the product. Filter rules include IP filtering and Port filtering. You may set 32 sets
of filter rules.
•
Action: “Drop” means drop the packets to filter. “Accept” means accept all packets related to this session.
•
Protocol: Choose to filter “TCP” or “UDP” protocol.
•
Source IP/Netmask: Enter the Source IP address which you want to filter and it’s Netmask.
•
Source PORT: Specify the Source PORT which you want to filter.
•
Destination IP/Netmask: Enter the Destination IP address which you want to filter and it’s Netmask
•
Source PORT: Specify the Destination PORT which you want to filter.
•
Apply: Click this button to save the settings.
•
Clear: If there is anything wrong with the settings you made, you can click “Clear” to configure the
page again