25
In case the Internet is selected, the system boots and searches ntp server. If the server is inaccessible, the system
synchronizes the date and the time from the first selected DVB channel. The system continues checking ntp server
every 10 sec, and as soon as the server is accessed the system synchronizes the date and the time from the
internet again.
In case DVB option is selected, the system synchronizes the date and the time from the first selected DVB channel
and then from the channel selected in the menu.
Time zone and Daylight saving time
must be set correctly in the system Time window
.
It is recommended to select
local programs. When all settings are entered, press
Apply.
The time is synchronized and the window is closed. The
time shown by set-top-box is always accurate and is corrected in winter and summer periods. If y
ou don‘t want to
save time settings, press
Exit
button to leave menu.
Fig. 36 Time.
Location
System obtains you location based on IP address or it is selected manually.
Defaults
In case you have made too many settings in the receiver and it is difficult to restore some undesired settings or some
wrong settings have appeared in your receiver, you can restore defaults. Select
Defaults
line and press
OK
. The
defaults are restored and installation guide appears on the TV screen.
System reboot
Select this option to reboot system any time needed.
Fan speed mode
You can select fan speed three options.
“Auto” means that fan speed depends on the system temperature.
Format HDD
HDD is factory format. If you change HDD, use this option to format it again.
Media server setup
Skyter media server can be found in your home network together with other connected media playback devices.
Select Media server as
“yes”. Now it is seen in your home network by your media playback equipment (PC or
SmartTV). This allows you to play records and see live channels in the corresponding folders. Select Media server
name option to change the name of your Skyter in the network.
Select
Renderer enable
ON if you want the receiver to play directly from UPNP connected device media content.
Eg tablets etc.
IPTV server
enable
set ON - your receiver works as IPTV server.
Play list is available at http://receiver_ip/iptv.xml
8. Receiver Control
The receiver is controlled by the remote control and the front panel keys, see 5.5:
keys
Fig1
. Press
STANDBY
button or power button on the front panel to turn the receiver on and off. When the
receiver is on, light-emitting diode on the front plate of the receiver is off, and when it is off, the diode is red. The
receiver can also be turned on by pressing any
1...9
buttons. If the receiver is turned on by pressing
STANDBY
Summary of Contents for Jaxster 3D HD
Page 1: ......
