![background image](http://html1.mh-extra.com/html/conrad/jaxster-3d-hd/jaxster-3d-hd_manual_2654608012.webp)
11
You can also select the type of audio signal to HDMI and S/PDIF output. PASS THROUGH means that the receiver
delivers selected audio track in compressed mode on the selected output. Decoded stereo PCM means that the
receiver delivers selected audio track in decoded stereo mode on selected output. Due to limited number of audio
codecs integrated, not all audio signals have audio signal in Decoded stereo PCM mode. You can select HDMI
Audio
out
on
MENU>Settings>System
setting>TV
out
settings>HDMI
audio
and
S/PDIF
out
MENU>Settings>System setting>TV out settings>S/PDIF
separately.
Fig. 14 TV settings and HDMI audio configuration
You can also control the equipment connected via HDMI cable. TV or AV receiver supports CEC. If
CEC
is selected
ON, the receiver switches ON TV and AV receiver, connected via HDMI. If an option
Force TV stand-by
is
selected, the receiver switches off all connected equipment as well. Pls note that
Control TV volume
option is not
mandatory for most TV-sets, and is usually supported only by AV receiver.
Option Convert 4:3 SD video
works only for SD video with 4:3 aspect ratio. If NO is selected, no conversion
happens. If ON is selected, the system converts 4:3 video material in to 16:9 screen to keep to right geometry. If
scale
is selected, the system fits video material as is.
6.1.5.
Connecting to the Network
Skyter 3D HD is equipped with 10/100Mbit LAN and 150Mbit WLAN interfaces. In
MENU>Settings>System
settings>Network
you can see the available network and connection.
Summary of Contents for Jaxster 3D HD
Page 1: ......