![background image](http://html1.mh-extra.com/html/conrad/d565/d565_operating-instructions-manual_2654005062.webp)
56
• After setting the input (INPUT), press the MODE button to enable the PRO LOGIC
settings.
• The ”PRO LOGIC” display begins to flash.
• Press the
▲
or
▼
button to select between the possible settings, i.e. ”A” (Auto) or
”ON” or ”OFF”.
• There are two ways to quit the mode:
Press the MODE button to confirm the setting. The setting procedure is contin-
ued and changes to the LISTENING mode.
Do not press any button for approximately 8 seconds after setting the Pro Logic
configuration. The unit then quits the setting procedure and changes back to the
user level.
The selected settings are saved in both cases.
The default for the Pro Logic setting function is: Auto
The indication ”A” (Auto) for automatic detection appears only if the decoder is
activated via the digital input by means of a Dolby Digital (RAW) signal. If no
Dolby Digital signal is present, it is possible to select only between ”ON” and
”OFF” settings.
If a Dolby Digital signal is present, the unit always automatically changes to the
Dolby Digital reproduction mode.
If the Pro Logic setting is ”ON”, the unit switches to Pro Logic reproduction
immediately no Dolby Digital signal is present.
If the Pro Logic setting is ”OFF”, the unit switches to stereo reproduction
immediately no Dolby Digital signal is present.
Select
Select
Remote operation of
setting buttons
Press 2 x
89
Réglages
Ces fonctions permettent de modifier les réglages de l'appareil en fonction du rac-
cordement et de la configuration de la pièce afin d'atteindre une restitution sonore
optimale.
Diagramme séquentiel des réglages
Marche/Arrêt
Sélection de l'option de réglage
Réglage du volume
Réglage du volume
Cycle de commutation de 2 s
Réglage de la temporisation
Réglage du volume
Changement d'option de réglage
Sélection de l'option de réglage
Changement d'option de réglage
Changement d'option de réglage
Changement d'option de réglage
Marche/Arrêt