DX-1S DIGITAL PABX - MFC98 Manual
7-5
6.
If the operator has set the Follow Me for the extension, the extension can cancel this feature by
himself/herself.
Remark
1.
Reference to DX-1S Operation Manual for details.
7.5.4
SET BUSY AND NO ANSWER TRANSFER FOR EXTENSION
The Attendant Console can set or cancel Busy and No Answer Transfer for other extensions. If the
extension is set with Busy and No Answer Transfer feature, the call will be transferred to the assigned
extension when the extension is busy or has not answered the call.
Operation
Set the feature:
1.
Attendant operator enters DOS Management Mode in MFC98 Console.
2.
Enter “3*”.
3.
Enter the directory number of the extension that the operator wants to set the feature for him/her.
4.
Press “*”.
5.
Enter the directory number of the extension that the call should forward to.
6.
Press “Enter”.
7.
The screen will display “3. BUSY AND NO ANSWER TRANSFER = YYYY”.
Cancel the feature:
1.
Attendant operator enters DOS Management Mode in MFC98 Console.
2.
Enter “3*”.
3.
Enter the directory number of the extension that the operators want to set the feature for him/her.
4.
Press “Enter”.
5.
The screen will display “3. BUSY AND NO ANSWER TRANSFER = OFF”.
Condition
1.
An extension cannot accommodate more than one forwarded extension. Each time of a new setting,
the old entry will be canceled.
2.
The extension can ask Attendant Console to set or cancel this feature for him/her.
3.
If the extension has set the Busy and No Answer Transfer, the operator can cancel this feature for the
extension.
4.
If the operator has set the Busy and No Answer Transfer for the extension, the extension can cancel
this feature by himself/herself.
Remark
1.
Reference to DX-1S Operation Manual for details.
7.5.5
SET WAKE UP SERVICE FOR EXTENSION
The Attendant Console can set or cancel Wake Up Service feature for other extensions. The extension is
set with Wake Up Service will ring at the set time as morning call or reminding alarm for appointment.
Operation
Set the feature:
1.
Attendant operator enters DOS Management Mode in MFC98 Console.
2.
Enter “4*”.
3.
Enter the directory number of the extension that the operator wants to set the feature for him/her.
4.
Press “*”.
5.
Enter the two digits wake up hour “HH” (24 hour format).
6.
Press “*”.
7.
Enter the two digits wake up minute “MM”.
8.
Press “Enter”.
9.
The screen will display “4. WAKE UP SERVICE = 7:30”.
Cancel the feature:
1.
Attendant operator enters DOS Management Mode in MFC98 Console.
2.
Enter “4*”.
3.
Enter the directory number of the extension that the operator wants to set the feature for him/her.
