Connection Electronics MFC98 Manual Download Page 24 | Manualshive

Page: 24 / 55

background image

DX-1S DIGITAL PABX - MFC98 Manual

6-6

Display

The call information is displayed as following:

Call Information

Console
Telephone
Status

Description

CALL BACK FROM EXT EEEE

Ringing

The call of Ext EEEE has been parked
or transferred by the console and is
calling back now.

CALL BACK FROM TRK TT

Ringing

The call of Trk TT has been parked or
transferred by the console and is
calling back now.

CALL BACK TO EXT EEEE

Call On Hold

The call in console telephone has
been parked or transferred by Ext
EEEE and is calling back to the
extension.

CALL FROM EXT EEEE

Ringing

The ringing call is made from Ext
EEEE.

CALL FROM TRK TT

Ringing

The ringing call is made from Trk TT.

DIAL TO EXT EEEE

Off Hook

The operator is dialing to Ext EEEE.

DIAL TO TRK TT

Off Hook

The operator is dialing to Trk TT.

TALK WITH EXT EEEE

Talking Stage

The call is connected with Ext EEEE.

TALK WITH TRK TT

Talking Stage

The call is connected with Trk TT.

TRANSFER FROM EXT EEEE

Ringing

The ringing call is transferred from Ext
EEEE.

TRANSFER FROM TRK TT

Ringing

The ringing call is transferred from Trk
TT.

TRANSFER TO EXT EEEE

Call On Hold

The call in console telephone is being
transferred to Ext EEEE.

Remark:

EEEE is the directory number of extension

TT is the trunk number

Table 6-3 CALL INFORMATION DISPLAY

6.13 DIALING NUMBER DISPLAY FIELD

The Dialing Number Display Field is next to the Calling Information Display field. When attendant dial a
number using MFC98, the dialed number will display on the Dialing Number Display Field. The dialed
number will only be cleared by press ‘ESC’ key in MFC98 keyboard.

Display

•

Number dialed. (‘0’ – ‘9’, ‘*’, ‘.’ and ‘/’. ‘Enter’ will display as ‘,’ and ‘-’ will display as ‘#’).

6.14 ‘FLASH’, ‘ANSWER’ AND ‘RELAESE’ BUTTONS

The ‘FLASH’, ‘ANSWER’ and ‘RELAESE’ buttons are located above the system clock display of the
Attendant Console screen. The functions of these three buttons are self-descriptive and they are mainly for
attendant operator to use in call processing operation. Click on the buttons is equal to take the action from
a Console Extension.

«
...
22
23
24
25
26
...
»

Summary of Contents for MFC98
























































Reviews:

No comments

Related manuals for MFC98

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Dialog 4106 Basic

Brand: Aastra Pages: 2

Brand: EastLink Pages: 28

Brand: Aastra Pages: 461

Brand: Aastra Pages: 40

Brand: Aastra Pages: 47

Brand: Aastra Pages: 47

Brand: Yealink Pages: 2

Brand: Dai Telecom Pages: 21

JabloPhone GDP-04

Brand: JabloCom Pages: 12

T-Octophon F 50

Brand: T-COM Pages: 167

Brand: Ultratec Pages: 28

EXI8560 - EXI 8560 Cordless Phone

Brand: Uniden Pages: 12

EXI4560 - EXI 4560 Cordless Phone

Brand: Uniden Pages: 48

EXI4246 - EXI 4246 Cordless Phone

Brand: Uniden Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands