DX-1S DIGITAL PABX - MFC98 Manual
7-1
7.
DOS MANAGEMENT MODE
When the console is operated in the DOS Management Mode, the attendant operator can set some features
for the extensions. Maintenance person can also enter DOS Programming Mode and DOS Diagnostic
Mode from DOS Management Mode.
7.1
ENTER DOS MANAGEMENT MODE
Enter the DOS Management Mode for three functions, they are features setting for extensions, go into
DOS Programming Mode and DOS Diagnostic Mode.
Operation
1.
Press the “F4” key in the console keyboard or Select DOS Management Mode from “Menu” button
window in Attendant Console Mode
2.
DOS Management Mode Password Inquiry window is displayed as in following figure.
Figure 7-1 DOS MANAGEMENT MODE PASSWORD INQUIRY WINDOW
3.
Enter Password of DOS Management Mode in the console keyboard and press “Enter” key or click
“OK” button.
4.
If the password is incorrect, it will display an error message and system will quit the inquiry window.
You need to re-do from step 1.
5.
If the password is correct, the Management Mode Screen will be displayed as following. The prompt
will display as “Mx>”, where M indicate Management Mode and x is the current Console I.D. (0 ~
15).
Figure 7-2 DOS MANAGEMENT MODE SCREEN
Remark
1.
The default Management Mode Password is “7854”.
