DX-1S DIGITAL PABX - MFC98 Manual
6-11
The following table shows a summary of mouse Operation in attendant Console Mode.
Function
Mouse Action
Execute a function button
Click on the function button
Access a trunk
Click on the trunk button
Dial / transfer to an
extension
Click on the extension button
Move an extension button
Shift-Click on extension number and hold the Shift key
(release mouse button). Drag the mouse pointer to desire
place and Shift-Click again to drop the extension button
Operation with extension or
trunk
Right-Click the extension or trunk button. Then a menu
of various possible operations (e.g. answer, monitor,
override, etc.) will display. Then select an appropriate
operation.
Configure programmable
function button
The programmable function buttons on the lower part of
Console mode screen can be configure by Right-Click
the button.
Configure extension button
display
Shift-Right-Click an extension button to edit the
button’s display number / name. After edit the button,
press ENTER to confirm change or ESC to cancel
change.
Extension Management
Ctrl-Right-Click and extension button will display the
Summary Management Menu for that extension. After
changing each field, press ENTER or double click to
confirm.
Table 6-6 MOUSE OPERATION IN CONSOLE ATTENDANT MODE
Examples
An attendant console had setup as in section 6.17.1 ATTENDANT CONSOLE SETUP.
•
Answer a call: When call waiting tone is heard, click “Answer” button. After the call is finished, click
“Release” button to release the call.
•
Pick up a call: When another extension is ringing, click on the “Pick up” user programmable button.
After the call is finished, click “Release” button to release the call.
•
Transfer a call to another extension: While talking, click on the destination extension button and click
“Release” button.
•
To initiate an intercom call: Just click on the extension button in idle state.
•
To initiate an out-going call: Click on a trunk button to get a trunk then presses the destination number
at keyboard.
•
To monitor a talking extension: Click on the talking extension button, when busy tone is heard, press
‘2’ to monitor.
6.18 LEAVE ATTENDANT CONSOLE MODE
Switch Attendant Console Mode to other operation mode.
Operation
1.
Press “F4 ~ F8” or click “Menu” button and select desired mode to switch to.
2.
The screen will change to the other operation mode screen.
Exit MFC98.
Operation
1.
Press “F2” or click “Menu” button and select “Exit” to exit MFC98.
