Connect-Tek Over IP
2
C. CTIP-01 LED Indications
Front View of CTIP-01
Reset
*
LEDs DTE Serial Local K Local M Video (Out)
*LEDs are, from left to right: Power, R- Port, WAN link, LAN link, USB, Video OK
•
Power
: Indicates one or both of the DC power inputs is providing your system with power.
•
R-Port
: See
Appendix D
for more information about the R-Port.
•
WAN
Link / LAN Link
: This is the standard “link light” which is typical for Ethernet equipment. It means the
network cable is connected to working Ethernet hub or switch. It lights up with a
link connection and blinks with network activity. The LEDs under the Ethernet
connectors respond in a similar manner.
•
USB
: This lights up when the USB port is connected to a host and that host has configured the USB port for
use. It will blink when USB data is transmitted.
•
Video OK
: This light is lit when a valid VGA signal is received from the host. It is off while in power save
mode, if no video is connected or if the host is off.
Rear View of CTIP-01
Video (IN) Host K Host M USB LAN WAN R-Port RS-232 (DCE) DC-in Spare
